Archive

Posts Tagged ‘Vantech’

Vantech P6000 Single sided (one pair) Pickup Trucks Universal ALUMINUM

March 17, 2012 Leave a comment

Vantech P6000 Single sided (one pair) Pickup Trucks Universal ALUMINUM

The P6000 is a universal one-sided Pickup system with a weight capacity of 250 lb. The A286 crossbars are reinforced aluminum with channels for optional . They are also aerodynamically designed for fuel efficiency and minimal wind noise. This system can accommodate wider loads of up to 33in. This full Aluminum system is powder coated high-gloss black for more protection. The total weight of system comes to only 26 lb. System can also be removed easily by releasing a few knobs.

Vantech P6000 Single sided (one pair) Pickup Trucks Universal ALUMINUM

I would like to share my experience on Vantech . check best price Vantech P6000 Single sided (one pair) Pickup Trucks Universal ALUMINUM for sale cheap and read customer reviews before you buy online

  • Universal Pickup Rack System
  • 3in X 1.5in Oblong Extruded Aluminum Vertical bars
  • 4in side supports with 3/4in eyehooks
  • Extruded aluminum Crossbars with channels allow for additional Strength
  • C-clamps can be places on bedrails of any height

Vantech M2000 Rack System Pickup Toppers & Caps Universal STEEL

March 4, 2012 Leave a comment

Vantech M2000 Rack System Pickup Toppers & Caps Universal STEEL

The Steel M2000 is a universal rack system that can be installed on any Pickup Topper & Caps (drilling required). All steel systems are galvanized and powder coated for superior protection. The extra wide 6in X 1.5in mounting base, polyfoam gasket and 6in X 2in interior plate secures the rack system onto the vehicle. Cross bars are made with 14 gauge steel and mounting bases are made with 11 gauge steel. Max load capacity of this system is 500 lb. for a 2 bar system. included (1 X 5in Ladder Guide: Separate material and ladders and allow for easy tie down.)(4 X 5in Side Support: Prevent material from falling off the sides.)(2 X 5in Ladder Stopper: Prevent ladders from sliding forward.)(2 X EZ Velcro Strap: Secures ladders in place within seconds.)(Easy turn knob: Adjust ladder stoppers and ladder guides.) This system is Available in black or white.

Vantech M2000 Rack System Pickup Toppers & Caps Universal STEEL

I would like to share my experience on Vantech . check best price Vantech M2000 Rack System Pickup Toppers & Caps Universal STEEL for sale cheap and read customer reviews before you buy online

  • Maximum weight capacity 500 lb
  • Will fit all toppers (drilling required)
  • System is Galvanized and powdercoated for superior protection
  • included and easy to install
  • M2000 total height 11.5in
Categories: Vantech Tags: , , , ,

Vantech J1000 Rack System Pickup Toppers & Caps Universal ALUMINUM

February 10, 2012 Leave a comment

Vantech J1000 Rack System Pickup Toppers & Caps Universal ALUMINUM

The J1000 is a low profile (3.5in) aerodynamically designed rack system that can be installed on any Pick-Up Topper & Caps (drilling required). The unique shape of the crossbars minimizes wind noise. The A285 crossbars are reinforced aluminum with channels and can support 400 lb. Mounting bases are 4in wide made with 11-gauge high strength steel. In total the system weighs in at only 12 lb.

Vantech J1000 Rack System Pickup Toppers & Caps Universal ALUMINUM

I would like to share my experience on Vantech . check best price Vantech J1000 Rack System Pickup Toppers & Caps Universal ALUMINUM for sale cheap and read customer reviews before you buy online

  • Low profile 3.5in total height with 50in long crossbars
  • Aerodynamically designed for fuel efficiency and minimize wind noise
  • A285 Crossbars are reinforced aluminum with channels. Max capacity: 400 lbs 2 Bar kit
  • Aluminum system is powdercoated for extra protection.
  • Will fit all vehicle with or without drip rails

Vantech H1 2 bar system Pickup Toppers & Caps Universal ALUMINUM

September 17, 2011 Leave a comment

Vantech H1 2 bar system Pickup Toppers & Caps Universal ALUMINUM

The Vantech H1 Aluminum system can hold up 600lb (evenly distributed). The Cross bars is 2in x 1in Reinforced extruded aluminum crossbars with internal structural support. The Cross bar is protected by non-slip plastic bar guard on top. Mounting upright are 3mm thick at the base and powder coated. The Mounting uprights are 8in extra wide base at 10.5in total height. The Base is welded complete onto upright post for complete seal. There are 4 x 1in eyehooks per mounting upright. Drilling is required to install system onto vehicle. Rubber cap on the upright post prevents wind noise and water leakage. The system Includes 5in ladder stopper to prevent ladder from sliding forward, Ladder stoppers are galvanized and rubber dipped. The system also includes 5.5in ladder guide for easy bungee and tie-down. Ladder guide are galvanized and rubber dipped. Easy turn knob allows quick adjustments and removal of ladder stopper and ladder guide. Velcro straps secure ladders within seconds up to 75 lbs. System powder coated and hardware is galvanized for additional protection against rust.

Vantech H1 2 bar system Pickup Toppers & Caps Universal ALUMINUM

I would like to share my experience on Vantech . check best price Vantech H1 2 bar system Pickup Toppers & Caps Universal ALUMINUM for sale cheap and read customer reviews before you buy online

  • A613 Crossbars are reinforced aluminum with channels for accessories. Max Load capacity of 600 lb.
  • Galvanized mounting base and accessories for additional protection against rusting
  • Clamps directly onto gutter rails for drill free installation
  • Mounting bases are 10 gauge steel and 14 gauge cross bars
  • System is powder coated for superior protection against rust and corrosion

Vantech H1 3 bar system Dodge Sprinter High Top 2002-06 STAINLESS STEEL

September 14, 2011 Leave a comment

Vantech H1 3 bar system Dodge Sprinter High Top 2002-06 STAINLESS STEEL

The Vantech H1 stainless steel system can hold up 900 lb 3 bar evenly distributed. The Crossbars is 2in x 1in heavy duty 14-gauge stainless steel. The Crossbar is also protected by a non-slip plastic bar guard on top. The stainless steel mounting upright is 12-gauge in thickness at the base. The mounting uprights are 8in wide at the base and 16.5in total height. The Base is welded complete onto the upright post for complete seal. There are 4 x 1in eyehook per mounting upright There is absolutely No drilling required, secures with drip rail clamps. The drip rail clamps are 11 gauge galvanized steel/powder coated 2in x 8in dipped in rubber top and bottom. Rubber cap on the upright post prevents wind noise and water leakage. The system Includes 5in ladder stopper to prevent ladder from sliding forward, Ladder stoppers are galvanized and rubber dipped. The system also includes 5.5in ladder guide for easy bungee and tie-down. Ladder guide are galvanized and rubber dipped. Easy turn knob allows quick adjustments and removal of ladder stopper and ladder guide. Velcro straps secure ladders within seconds up to 75 lb. This system is Rust Free.

Vantech H1 3 bar system Dodge Sprinter High Top 2002-06 STAINLESS STEEL

I would like to share my experience on Vantech . check best price Vantech H1 3 bar system Dodge Sprinter High Top 2002-06 STAINLESS STEEL for sale cheap and read customer reviews before you buy online

  • A316 2in x 1in rectangular heavy duty stainless steel cross bars. Max weight capacity 900 lb.
  • Heavy Duty Stainless Steel System with Polished Finish
  • Stainless steel clamps directly onto gutter rails for drill free installation
  • Stainless steel mounting upright are 11-gauge at the base.
  • Cross bars are protected by plastic non-slip bar guards
Categories: Vantech Tags: , , , ,